The product can only process one type of paper at a time. Turn the door latch counter-clockwise, and then pull the door toward you to remove it. Solutions Follow these solutions in the order presented to resolve the issue. Solution Follow these steps in the order presented to resolve the issue. The black cartridge goes in the right carriage slot.
|Date Added:||27 October 2011|
|File Size:||38.50 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
Europe, Middle East, Africa. Reinsert the cartridges Hold the cartridge so that the nozzles face down and the contacts face toward the carriage. Reconnect the USB cable, and then try to print again. If this roller is not ph, more paper feed issues are likely to occur. The product lights might flash and the carriage might move.
Make sure that all the paper in the stack is the same size and type. The Power light is on and the Print Cartridge light blinks In this error in,jet, the following light pattern displays on the product control panel and a message might display on the computer:. Use both hands to pull whole sheets of paper to avoid tearing them.
Determine the cartridge issue When there is an issue with a cartridge, a yellow arrow on top of the carriage inside the product points to prinher drawing of a cartridge that indicates what the issue is.
Purchase replacement cartridges and other supplies from the HP Store or local retailers.
HP Deskjet 5552 Standard Inkjet Printer
The Tri-color Cartridge Problem icon. Click Fileand then click Print. Hold the cartridge so that the nozzles face down and the contacts face toward the carriage. Use quality paper that meets HP product specifications. Open the top cover on the product. Turn the printer off and on again Press the Power button to turn off the product.
HP Deskjet inkjet printer ink cartridges – best price & quality – IJT Direct
Press the swab against the paper pick roller, and then rotate the roller upward with your fingers. Remove paper from the front of the product.
Remove the cartridge Press the Power button to turn on the product. Open the duplexer door. Press and hold the Power button. Remove the cartridges Press the Power button to turn on the product. Press the Power button to turn off the product. After installing a new cartridge, the product automatically calibrates the cartridges and prints an alignment page.
Pulling the paper out too quickly increases the chances of damaging the product. If the light continues to blink after several seconds, continue to the next solution.
The lights indicate product status and are useful for diagnosing printing problems. If the issue persistscontinue with the next solution. Service or replace your HP product if you inkjey all preceding steps. Slide the paper width guide and the paper length guide to their outermost positions.
Clear any jammed paper Jammed paper can cause the carriage to stall.
HP Deskjet 5552 Manuals
The product is processing a print job, ihkjet waiting for the ink to dry on a document. Close the cartridge latch. The Power light is on.
Wait for the ink to dry on the printed document The product might be waiting for ink to dry on the printed document. The Power light is on and the Resume light blinks.
Attach the rear access door and secure the door latch.